EAGLE POWER LTD, QUALITY GENERATORS

CONTROL & TRANSFER PANELS FOR THE PERKINS RANGE

Control panels and automatic load transfer panels of the Perkins range. AMF panel includes an auto start control panel and automatic load transfer panel which will be able to start the generator automatically in case of mains failure.

To view a details and photo please click on the modele below

Control Panel	Panel is standard for	Manual Start	Autostart	Analogue Disply	Digital Disply	Remote Monitoring Capable	Optional Remote Annunicator	synchro- nises Gensets	Options Available
1001	P27 - P110E / P600 and P660E
2001	P135 - P688E1 / P650P1 - P2200E
Access 2000	Standard with vision silent canopy
Access 4000	Optional
4001	Optional
4001E	Optional
6100	Optional
6200	Optional
6300	Optional
6400	Optional

Automatic Load Trasfer Panels
(used with one of the auto start panels "above" to make an AMF panel for automatic start in case of mains failure)

TC series Standard for AMF panels for generators up to 125 amps

TI series Optional for AMF panels for generators up to 125 amps

STI series Standard for AMF panels for generators above 125 amps

Équipement Standard (norme)
1001 2001 4001 4001E

instrumentation
Voltmeter
*

*

*

*

Ammeter
*

*

*

*

Combined frequency & tachometer
*

*

*

*

Hours Run Counter
*

*

*

*

Coolant Temperature Guage
*

*

*

*

Lube Oil Pressure Guage
*

*

*

*

Battery condition voltmeter
*

*

*

*

Controls Keyswitch Off/Run/Preheat/Start
*

Run/off/auto switch
*

*

*

Lock Down Stop Button
*

*

*

*

Heater control - 3 circuits 220/240V AC
*

*

*

Lamp Test Pushbutton
*

*

*

*

7 position voltmeter phase selector switch
*

*

*

*

Ammeter phase selector switch
*

*

*

*

Cycle cranking (3 cycles with adjustable timing)
*

*

*

Cool down timer
*

*

Cold weather start

Start push button

Shutdown with
individual warning lamps Fail to start
*

*

*

High coolant temperature
*

*

*

*

Low lube oil pressure
*

*

*

*

Overspeed
*

*

*

Alarms with
individual warning lamps

Approaching low oil pressure
*

Approaching high engine temperature
*

Low battery voltage
*

*

Battery charger failure
*

Control switch not in auto mode
*

Glow plugs energised

Remote signals/contacts
from panel
Interface to remote annunciator

*

Terminals for remote emergency stop
*

*

*

Volt free contacts for common alarm signal
*

*

Common fault alarm signal *
*

Additional fault channels channels available for optional shutdowns 1 2

One channel available for optional alarms * *

4 additional fault channels available *

Access 2000 (digital) Standard Features	Access 4000 (digital) Standard Features
AC metering AC voltage AC current Frequency (Hz)	Metering AC V AC current Frequency (Hz) kW, kVAr, kVA, pf (cos Φf ), KWhr Tachometer (rpm) Lube oil pressure Coolant temperature Battery voltage Hours run Start attempt counter 10 - 35 KVA	27 - 2200 KVA
Controls Ready/off/reset push button Cold weather start Start push button	Controls Run/Off/Auto control switch Crank duration Pre-heat control pushbutton Crank repeats Lock down stop button Remote stop delay (inc. cooldown) Remote start delay Heater control - 3 circuits 220/240V AC Crank delay Static battery charger (5 amp) 220/240V AC
Shutdowns Low oil pressure (integrated into oil pressure gauge) High water temperature (integrated into water temperature gauge) Overspeed/emergency stop Fail to start/lockout	Shutdowns Fail to start shutdown High coolant temperature shutdown Low lube oil pressure shutdown Stop button operated shutdown Overspeed shutdown Over-voltage shutdown Under-voltage shutdown Over-frequency shutdown Under-frequency shutdown
Alarms Charging alternator failure (integrated into battery voltmeter) Glow plugs energised	Alarms Approaching high coolant temperature alarm Approaching low oil pressure alarm Battery charger failure alarm Low battery voltage alarm Not in auto mode alarm
Status indicators System activated (heartbeat) Hours run meter Battery voltmeter Oil pressure gauge Water temperature gauge	Status Indicators Visual Alarm (with priority flashing) Panel mounted audible alarm
Spare warning/Shutdown fault	Additional Fault Channels 4 Spare shutdown channels can be pr shutdown or alarm
	Remote Signals/Contacts Volts free contact - common alarm Terminals for connection to r Volts free contact - generator running

Automatic Load Trasfer Panels (used with one of the auto start panels "above" to make an AMF panel for automatic start in case of mains failure)
TC series	Standard for AMF panels for generators up to 125 amps
TI series	Optional for AMF panels for generators up to 125 amps
STI series	Standard for AMF panels for generators above 125 amps

Équipement Standard (norme)		1001	2001	4001	4001E

instrumentation	Voltmeter	*	*	*	*
	Ammeter	*	*	*	*
	Combined frequency & tachometer	*	*	*	*
	Hours Run Counter	*	*	*	*
	Coolant Temperature Guage	*	*	*	*
	Lube Oil Pressure Guage	*	*	*	*
	Battery condition voltmeter	*	*	*	*
Controls	Keyswitch Off/Run/Preheat/Start	*
	Run/off/auto switch		*	*	*
	Lock Down Stop Button	*	*	*	*
	Heater control - 3 circuits 220/240V AC		*	*	*
	Lamp Test Pushbutton	*	*	*	*
	7 position voltmeter phase selector switch	*	*	*	*
	Ammeter phase selector switch	*	*	*	*
	Cycle cranking (3 cycles with adjustable timing)		*	*	*
	Cool down timer			*	*
	Cold weather start
	Start push button
Shutdown with individual warning lamps	Fail to start		*	*	*
	High coolant temperature	*	*	*	*
	Low lube oil pressure	*	*	*	*
	Overspeed		*	*	*
Alarms with individual warning lamps	Approaching low oil pressure				*
	Approaching high engine temperature				*
	Low battery voltage			*	*
	Battery charger failure				*
	Control switch not in auto mode				*
	Glow plugs energised
Remote signals/contacts from panel	Interface to remote annunciator				*
	Terminals for remote emergency stop		*	*	*
	Volt free contacts for common alarm signal		*		*
	Common fault alarm signal			*	*
Additional fault channels	channels available for optional shutdowns			1	2
	One channel available for optional alarms			*	*
	4 additional fault channels available				*