EAGLE POWER LTD, QUALITY GENERATORS

Silent Night Battery Charging System

No noisy generator at night, Longer generator life, less fuel consumption,
not a moment without power

We can supply a battery system that has a storage capacity of 18 KWh. This system has a maximum output at any time of 1600 watt. This system can work with the generator and the mains. It can support them or replace them. It can control the generator to start when needed either at low batteries or excess load. This system will be like a UPS (clean steady power) and you will never have a time with no power and your computer will never shut down because of mains failure.

This system cost ex works Spain including 12 long life low maintenance batteries: 4500 euros

The system includes Phoenix Multiplus C 24/1600/40 Invertor charger + Interface MK.2b + 12 Long life low maintenance battaries (OPzS Solar 765)

Phoenix Multiplus C 24/1600/40

Combined Charger sinusoidal Inverter

Automatic Transfer without interruptions: In case of failure in the network or disconnection of the generator set, the MULTI will change automatically from charger to inverter start feeding the connected devices (load).

Practically limitless capacity thanks to the connection in parallel: You can connect between two and five devices MULTI in parallel. In this way, it is possible to obtain with 5 units 24/3000/70 MULTI a power output of 15kVA and a charging capacity of 350A.

Control of Power: Maximum advantage of a limited network voltage:The Multi can provide a powerful voltage of load (2kW or 10A by each MULTI).

With the panel Phoenix MULTI Control the Multi will consider the other devices that consume current at the time of loading and will use the current that is “not needed”.

Three-phase connection: With 3 phases of 5 units MULTI it can reach a power output of 45kW and a charging capacity of 1050A.

Power Assistant: Maximum yield of your generator set or the using of the network: MULTIPLUS works in parallel with the generator set or the network and duplicates the available power. It provides additional energy of the battery when it is necessary. Thus, in the output there will never be momentary drop of voltage, when there is excess of voltage, it is used to load the battery.

Variable charger in 4 stages and a system of batteries charging independent for 2 generators: Adaptable charger in 4 stages which adapts automatically to the consumption of the battery. If the battery is not used, the MULTI goes to the equalization mode to minimize the auto-wear away and extend the life of the battery to the maximum.

We reserve to the right of changes of design or modifications for technical development.

5 Units in parallel: power output 12.5 kW

The investor has a free relay of power. Opened - Closed. With these two cables the generator can be started.

It is possible to be programmed to start the generator by low battery and power consumption.

It is possible to stop the generator because the peak consumption has been disconnected or because the battery has arrived at a certain voltage (charged).

Phoenix Multi/MultiPlus

12 Voltio 24 Voltio 48 Voltio

C 12/800/35 C 24/800/16

C 12/1200/50 C 24/1200/25 C 48/1200/12

C 12/1600/70 C 24/1600/40 C 48/1600/20

12/1600/70 24/1600/40 48/1600/20

12/2500/120 24/3000/70 48/3000/40

Control of Power

Yes

Power Boost (vers.MultiPlus) i )

no (3)

Yes, MultiPlus

no (3)

Yes, MultiPlus

INVERTOR

Input voltage range (V DC)

9,5 – 17 V

19 – 33 V

38 – 66 V

Output voltage (V AC)

230 VAC ± 2%

Frecuencia: 50 Hz ± 0,1%

(1)

Cont. output power at 25 °C (VA) (5)

800

1200

1600

2500 / 3000 / 3000

Cont. output power at 25 °C (W)

700

1000

1300

2000 / 2500 / 2500

Cont. output power at 40 °C (W)

650

900

1200

1600 / 2000 / 2000

Maximum power (W)

1600

2400

3000

4500 / 6000 / 6000

Maximum efficiency (%)

92 / 94

93 / 94 / 95

Consumption with no load (W)

5 / 8

5 / 8 / 10

5 / 9 / 10

10 / 10 / 12

Charger

Input AC

Input voltage: 187-265 VAC

Frecuency: 45 – 55 Hz

Power Factor: 1

Load voltage in ‘absorption' (V DC)

14,4 / 28,8 / 57,6

Load voltage in ‘flotation' (V DC)

13,8 / 27,6 / 55,2

Equalization mode (V DC)

13,2 / 26,4 / 52,8

Load current (service) (A)

(4)

35 / 16

50 / 25 / 12

70 / 40 / 20

120 / 70 / 40

Load current (starting) (A)

Temperature sensor

yes

Common Spec

Multi purpose relay driver or relay

(6)

relay driver (7)

relay

Protections

(2)

a,b,c,d,f,g,h

a -h

Work temperature and humidity

Working Temp. 0 -50°C (ventilation forced)

humidity (without condensationn) : max 95%

ENCLOSURE

Common Spec

Material & Color: aluminum (blue RAL 5012)

Protection grade: IP 21

Battery connection

Battery cable 1.5 m

bolt M8

Connection 230 a V AC

plug G-ST18i

bracket 2,5 mm

Weight (Kg)

Dimensions (alxanxpr mm)

375x214x110

362x258x218

NORMS

Security

EN 60335-1, EN 60335-2-29

Emission

EN 50081-1, EN55014, EN 61000-3-2, EN 61000-3-3

Immunity

EN 55014-2

Automotive Directive

95/54/EC

1 – Possible config. a 60Hz; 120V AC under order
2 -Protections:
a. Short curcuit
b. Sobrecarga
c. Battery voltaje access
c. Battery voltaje access

d. Battery Low Voltage
e. Detection of polarity inversion
h. Access Heat
3 –Not available in version MultiPlus
4 -A ambient Temp 25ºC

5 - Peak lineal load factor 3:1

6- Multipurpose relay which can be set for general alarm, DC
undervoltage or genset start signal function

Life of 15 years, Recyclable, low maintenance

Stationary batteries

Main Characteristics

The Classic batteries have been proven as independent power plants, during decades, with capacity, robustness, length life design and viability.

High operational viability under all type of conditions of use.

Low maintenance due to the low amount of antimony in the plates, and a great electrolyte reserve.

Case made in plastic materials transparent of high quality.

Available also loaded in dry with electrolyte separately.

Low level of gasification by the low antimony level. <3% (IN 50272-2)

Conform to the norms 736 DIN 40 and 737 DIN 40 T3

Electrolyte: Diluted sulfuric acid. dN = 1,24 kg/l. The important electrolyte reserve, considering the low water consumption, allows considerably to reduce the frequency of the maintenance.

Design of the optimized plates, provides a capacity superior to the one of the norms DIN.

tubular positive

Positive plates, known by its resistance to the overloads and cycling

Negative Plates type FAURE. Its thickness, assures an equal life to the one the positive ones. The new design of the positive plates, guarantees the perfect cohesion of the active matters and the flow of the current in optimal conditions.

Triple separation, guarantees the electrical isolation between the plates, a homogenous distribution of the electrolyte and a good cleaning of the active matter, in individual during the cycling.

Applications

The batteries Classic Solar, are a robust source of energy warehouse, with a proven technology during decades in all type of applications like Renewable telecommunications, Energies, distribution of energy, UPS, security systems and lighting system of emergency.

Use and maintenance

Voltage of battery

The voltage of the open circuit oscillates between 2.04 and 2.09 v by elements, according to the density of the electrolyte and supposing that the battery totally is loaded.

Location

The recommendable room temperature is between 15 and 25ºC. It is advised not to exceed 38ºC.

In case the battery is going to work in smaller temperatures, a diminution of the capacity of the battery takes place, reason why it would be necessary to use bigger batteries.

Model	Capacity Nominal C₁₀₀ 1.85 V/C Ah.	Capacity Nominal C₁₂₀ 1.85 V/C 25ºC Ah.	l	b/w	H*	Weight vaso inlc. Acid aprox.	Resistence Internal mohm.	Corrent Corto Circuit A	Poles
OPzS Solar 190	185	190	105	208	405	13,7	1,45	1400	1
OPzS Solar 245	240	245	105	208	405	15,0	1,05	1950	1
OPzS Solar 305	300	305	105	208	405	16,6	0,83	2450	1
OPzS Solar 380	370	380	126	208	405	20,0	0,72	2850	1
OPzS Solar 450	440	450	147	208	405	23,3	0,63	3250	1